Skip to main content.

The University of Northumbria at Newcastle: GB-Newcastle Upon Tyne: TeT21/0047 Provision of Thermal vacuum chamber for satellite component testing

  The University of Northumbria at Newcastle is using Delta eSourcing to run this tender exercise

Notice Summary
Title: GB-Newcastle Upon Tyne: TeT21/0047 Provision of Thermal vacuum chamber for satellite component testing
Notice type: Competitive Contract Notice
Authority: The University of Northumbria at Newcastle
Nature of contract: Not applicable
Procedure: Not applicable
Short Description: We require a vacuum chamber with pumps and thermal plate capable of reaching 10-6 mbar pressure, or below, with a thermal control system for the internal volume that allows fixed and cycling temperatures between -35 and +100 degrees C. The internal volume of the chamber should accommodate a test unit of minimum size 350mm x 100mm x 100mm (i.e. the internal volume should be at minimum 500mm x 300mm x 300mm), however larger internal volume is desirable. The chamber should have at least one feed through for power and data communications to the device inside such that tests of electronics can be controlled from outside of the chamber. The system should include any temperature and pressure sensors required for accurate operation. The system should not require cryogenic cooling or any form of liquid nitrogen supply, and be suitable for installation in a laboratory setting on the second floor. The system should include all pumping, cooling, command and control devices required for complete functionality.
Published: 13/01/2022 15:08

View Full Notice

Competitive Contract Notice

1. Title: GB-Newcastle Upon Tyne: TeT21/0047 Provision of Thermal vacuum chamber for satellite component testing
2. Awarding Authority:
    Northumbria University at Newcastle
    Sutherland Building, Newcastle Upon Tyne, NE1 8ST, United Kingdom
    Tel. 0191 2274303, Email: jill.black@northumbria.ac.uk, URL: https://www.northumbria.ac.uk
    Contact: Jill Black, Attn: Jill Black
3. Contract Type: Supplies
      Sub Type: PURCHASE

4. Description: Hyperbaric chambers. Continuous-flow chambers for ultrasound disintegrators. Thermal insulating material. Laboratory pumps and accessories. Laboratory, optical and precision equipments (excl. glasses). Thermal insulation work. We require a vacuum chamber with pumps and thermal plate capable of reaching 10-6 mbar pressure, or below, with a thermal control system for the internal volume that allows fixed and cycling temperatures between -35 and +100 degrees C. The internal volume of the chamber should accommodate a test unit of minimum size 350mm x 100mm x 100mm (i.e. the internal volume should be at minimum 500mm x 300mm x 300mm), however larger internal volume is desirable. The chamber should have at least one feed through for power and data communications to the device inside such that tests of electronics can be controlled from outside of the chamber. The system should include any temperature and pressure sensors required for accurate operation.
The system should not require cryogenic cooling or any form of liquid nitrogen supply, and be suitable for installation in a laboratory setting on the second floor. The system should include all pumping, cooling, command and control devices required for complete functionality.
5. CPV Codes:
   33157500 - Hyperbaric chambers.
   38436730 - Continuous-flow chambers for ultrasound disintegrators.
   44111520 - Thermal insulating material.
   42122500 - Laboratory pumps and accessories.
   38000000 - Laboratory, optical and precision equipments (excl. glasses).
   45321000 - Thermal insulation work.

6. NUTS Codes :
   UKC - NORTH EAST (ENGLAND)

7. Main Site or Location of Works, Main Place of Delivery or Main Place of Performance: NORTH EAST (ENGLAND),
8. Reference Attributed by the Awarding Authority: T21/0047
9. Estimated Value of Requirement: Category H: 100K to 500K
Currency: GBP
10. Deadline for Expression of Interest: 27/01/2022 17:00:00
11. Address to which they must be sent:
   Not Provided
   
12. Other Information:
Other Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://neupc.delta-esourcing.com/tenders/UK-GB-Newcastle-Upon-Tyne:-TeT21/0047-Provision-of-Thermal-vacuum-chamber-for-satellite-component-testing/V7U3SS26GX

To respond to this opportunity, please click here:
https://neupc.delta-esourcing.com/respond/V7U3SS26GX
TKR-2022113-PRO-19494407
Suitable for VCO: No
Procedure Type:OPEN
Period of Work Start date: 14/02/2022
Period of Work End date: 23/02/2023
Is this a Framework Agreement?: no

View any Notice Addenda

GB-Newcastle Upon Tyne: TeT21/0047 Provision of Thermal vacuum chamber for satellite component testing

Competitive Contract Notice Addendum

Associated Parent Notice
CompetitiveContractNotice - GB-Newcastle Upon Tyne: TeT21/0047 Provision of Thermal vacuum chamber for satellite component testing
1. Title: GB-Newcastle Upon Tyne: TeT21/0047 Provision of Thermal vacuum chamber for satellite component testing
2. Awarding Authority:
    Northumbria University at Newcastle
    Sutherland Building, Newcastle Upon Tyne, NE1 8ST, United Kingdom
    Tel. 0191 2274303, Email: jill.black@northumbria.ac.uk, URL: https://www.northumbria.ac.uk
    Contact: Jill Black, Attn: Jill Black
      Sub Type: PURCHASE

4. Description: Hyperbaric chambers. Continuous-flow chambers for ultrasound disintegrators. Thermal insulating material. Laboratory pumps and accessories. Laboratory, optical and precision equipments (excl. glasses). Thermal insulation work. We require a vacuum chamber with pumps and thermal plate capable of reaching 10-6 mbar pressure, or below, with a thermal control system for the internal volume that allows fixed and cycling temperatures between -35 and +100 degrees C. The internal volume of the chamber should accommodate a test unit of minimum size 350mm x 100mm x 100mm (i.e. the internal volume should be at minimum 500mm x 300mm x 300mm), however larger internal volume is desirable. The chamber should have at least one feed through for power and data communications to the device inside such that tests of electronics can be controlled from outside of the chamber. The system should include any temperature and pressure sensors required for accurate operation.
The system should not require cryogenic cooling or any form of liquid nitrogen supply, and be suitable for installation in a laboratory setting on the second floor. The system should include all pumping, cooling, command and control devices required for complete functionality.
5. CPV Codes:
   33157500 - Hyperbaric chambers.
   38436730 - Continuous-flow chambers for ultrasound disintegrators.
   44111520 - Thermal insulating material.
   42122500 - Laboratory pumps and accessories.
   38000000 - Laboratory, optical and precision equipments (excl. glasses).
   45321000 - Thermal insulation work.

6. NUTS Codes :
   UKC - NORTH EAST (ENGLAND)

7. Main Site or Location of Works, Main Place of Delivery or Main Place of Performance: NORTH EAST (ENGLAND),
8. Reference Attributed by the Awarding Authority: T21/0047
9. Estimated Value of Requirement: Category H: 100K to 500K
Currency: GBP
10. Deadline for Expression of Interest: 04/02/2022 17:00:00
11. Address to which they must be sent:
   Not Provided
   
12. Other Information:
Other Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
To view this notice, please click here:
https://neupc.delta-esourcing.com/delta/viewNotice.html?noticeId=658615648

13. Description of Amendment / Addition: Extended submission date for EOIs/bids TKR-2022118-PRO-19513254

Suitable for VCO: No
Procedure Type:OPEN
Period of Work Start date: 14/02/2022
Period of Work End date: 23/02/2023



Complementary Information
Funding:
Is this a Framework Agreement?: no

View Award Notice

Competitive Contract Award Notice

Associated Parent Notice
CompetitiveContractNoticeAddendum - GB-Newcastle Upon Tyne: TeT21/0047 Provision of Thermal vacuum chamber for satellite component testing
1. Title: GB-Newcastle Upon Tyne: TeT21/0047 Provision of Thermal vacuum chamber for satellite component testing
2. Awarding Authority:
    Northumbria University at Newcastle
    Sutherland Building, Newcastle Upon Tyne, NE1 8ST, United Kingdom
    Tel. 0191 2274303, Email: jill.black@northumbria.ac.uk, URL: https://www.northumbria.ac.uk
    Contact: Jill Black, Attn: Jill Black
3. Contract Type: Supplies
      Sub Type: PURCHASE

4. Description: Hyperbaric chambers. Continuous-flow chambers for ultrasound disintegrators. Thermal insulating material. Laboratory pumps and accessories. Laboratory, optical and precision equipments (excl. glasses). Thermal insulation work. We require a vacuum chamber with pumps and thermal plate capable of reaching 10-6 mbar pressure, or below, with a thermal control system for the internal volume that allows fixed and cycling temperatures between -35 and +100 degrees C. The internal volume of the chamber should accommodate a test unit of minimum size 350mm x 100mm x 100mm (i.e. the internal volume should be at minimum 500mm x 300mm x 300mm), however larger internal volume is desirable. The chamber should have at least one feed through for power and data communications to the device inside such that tests of electronics can be controlled from outside of the chamber. The system should include any temperature and pressure sensors required for accurate operation.
The system should not require cryogenic cooling or any form of liquid nitrogen supply, and be suitable for installation in a laboratory setting on the second floor. The system should include all pumping, cooling, command and control devices required for complete functionality.
5. CPV Codes:
   33157500 - Hyperbaric chambers.
   38436730 - Continuous-flow chambers for ultrasound disintegrators.
   44111520 - Thermal insulating material.
   42122500 - Laboratory pumps and accessories.
   38000000 - Laboratory, optical and precision equipments (excl. glasses).
   45321000 - Thermal insulation work.

6. NUTS Codes :
   UKC - NORTH EAST (ENGLAND)

7. Main Site or Location of Works, Main Place of Delivery or Main Place of Performance: NORTH EAST (ENGLAND),
8. Reference Attributed by the Awarding Authority: T21/0047
9. Awarded to:

    Sistem Technology Limited
    National ID: 7699239, Grafton Suit, Caswell Science and Technology Park, Towcester, NN12 8EQ, United Kingdom
    Tel. 07736686356, Email: chris@sistemtechnology.com
    Attn: Chris Ridge
Value Cost: 237,600
Is Awardee likely to subcontract?: No Awarded to SME?: No
10. Date of Contract Award: 25/02/2022
11. Number of Tenders Received: 4
12. Other Information:
Other Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
To view this notice, please click here:
https://neupc.delta-esourcing.com/delta/viewNotice.html?noticeId=674923839
TKR-2022311-PRO-19771363
Suitable for VCO: No
Procedure Type:OPEN
Period of Work Start date: 28/02/2022
Period of Work End date: 27/02/2023