University of Leeds is using Delta eSourcing to run this tender exercise
| Notice Summary |
|---|
| Title: | GB-Leeds: Z/3395 Bespoke External Furniture at Edward Boyle Library |
| Notice type: | Competitive Contract Notice |
| Authority: | University of Leeds |
| Nature of contract: | Not applicable |
| Procedure: | Not applicable |
| Short Description: | The tender is for the co-ordination, fabrication / supply and installation / assembly of bespoke furniture for a location outside the University of Leeds Edward Boyle Library on the University’s main campus. It is proposed that the main contractor co-ordinate preliminary on-site work necessary (e.g. setting support dowels for tables into the ground) and commissioning, delivery and installation of the bespoke benches and tables. Manufacturer of the benches and tables is to be contractor's choice, or they are welcome to undertake this in-house. However, to date the project has been discussed with Factory Furniture due to similarities with items of furniture that are in their standard range and existing furniture at The University. Should alternatives to working with Factory Furniture be proposed, proposals / working method to be included with tender return. Detail design of benches and tables - including but not limited to concrete mix, supports for slats, lifting eyes, dowel to secure table supports, means of drainage, levelling shims - to be agreed with manufacturer and approved by University of Leeds Architectural Technical Officer prior to manufacture. Drawings show a proposal to move a wayfinding point / sign presently on the site. This will be co-ordinated by the University if it goes ahead. If it doesn't, the spacing of the benches and orientation of bench B1 will be adjusted to suit (as shown in the feasibility document) Drawings show a proposal for bespoke planters outside the Edward Boyle Library windows. Details and means of procurement of these are TBC and therefore do not form part of this contract. Some details in the feasibility study have been superseded - where they contradict with other documents it is the other documents which should be referred to. |
| Published: | 08/10/2018 16:50 |
View Full Notice
1. Title: GB-Leeds: Z/3395 Bespoke External Furniture at Edward Boyle Library
2. Awarding Authority:
University of Leeds
Purchasing Office, 29 - 31 Cromer Terrace, Leeds, LS2 9JU, United Kingdom
Tel. 0113 3437534, Email: r.trimble@adm.leeds.ac.uk
Contact: Richard Trimble, Attn: Richard Trimble
3. Contract Type: Works
Sub Type: Execution
4. Description: Construction work. The tender is for the co-ordination, fabrication / supply and installation / assembly of bespoke furniture for a location outside the University of Leeds Edward Boyle Library on the University’s main campus.
It is proposed that the main contractor co-ordinate preliminary on-site work necessary (e.g. setting support dowels for tables into the ground) and commissioning, delivery and installation of the bespoke benches and tables. Manufacturer of the benches and tables is to be contractor's choice, or they are welcome to undertake this in-house. However, to date the project has been discussed with Factory Furniture due to similarities with items of furniture that are in their standard range and existing furniture at The University. Should alternatives to working with Factory Furniture be proposed, proposals / working method to be included with tender return.
Detail design of benches and tables - including but not limited to concrete mix, supports for slats, lifting eyes, dowel to secure table supports, means of drainage, levelling shims - to be agreed with manufacturer and approved by University of Leeds Architectural Technical Officer prior to manufacture.
Drawings show a proposal to move a wayfinding point / sign presently on the site. This will be co-ordinated by the University if it goes ahead. If it doesn't, the spacing of the benches and orientation of bench B1 will be adjusted to suit (as shown in the feasibility document)
Drawings show a proposal for bespoke planters outside the Edward Boyle Library windows. Details and means of procurement of these are TBC and therefore do not form part of this contract.
Some details in the feasibility study have been superseded - where they contradict with other documents it is the other documents which should be referred to.
5. CPV Codes:
45000000 - Construction work.
6. NUTS Codes :
UKE42 - Leeds
7. Main Site or Location of Works, Main Place of Delivery or Main Place of Performance: Leeds,
8. Reference Attributed by the Awarding Authority:
9. Estimated Value of Requirement: Category I: 50K to 100K
Currency: GBP
10. Deadline for Expression of Interest: 29/10/2018 11:00:00
11. Address to which they must be sent:
University of Leeds
Purchasing Office, 29 - 31 Cromer Terrace, Leeds, LS2 9JU, United Kingdom
Tel. 0113 3437534, Email: r.trimble@adm.leeds.ac.uk
Contact: Richard Trimble, Attn: Richard Trimble
12. Other Information:
Other Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://neupc.delta-esourcing.com/tenders/UK-GB-Leeds:-Z/3395-Bespoke-External-Furniture-at-Edward-Boyle-Library/A872Y835G2
To respond to this opportunity, please click here:
https://neupc.delta-esourcing.com/respond/A872Y835G2
TKR-2018108-PRO-13334641
Suitable for VCO: No
Procedure Type:OPEN
Period of Work Start date: 26/11/2018
Period of Work End date: 31/01/2019
Is this a Framework Agreement?: no
View any Notice Addenda
View Award Notice
Associated Parent Notice
CompetitiveContractNotice - GB-Leeds: Z/3395 Bespoke External Furniture at Edward Boyle Library
1. Title: GB-Leeds: Z/3395 Bespoke External Furniture at Edward Boyle Library
2. Awarding Authority:
University of Leeds
Purchasing Office, 29 - 31 Cromer Terrace, Leeds, LS2 9JU, United Kingdom
Tel. 0113 3437534, Email: r.trimble@adm.leeds.ac.uk
Contact: Richard Trimble, Attn: Richard Trimble
3. Contract Type: Works
Sub Type: Execution
4. Description: Construction work. The tender is for the co-ordination, fabrication / supply and installation / assembly of bespoke furniture for a location outside the University of Leeds Edward Boyle Library on the University’s main campus.
It is proposed that the main contractor co-ordinate preliminary on-site work necessary (e.g. setting support dowels for tables into the ground) and commissioning, delivery and installation of the bespoke benches and tables. Manufacturer of the benches and tables is to be contractor's choice, or they are welcome to undertake this in-house. However, to date the project has been discussed with Factory Furniture due to similarities with items of furniture that are in their standard range and existing furniture at The University. Should alternatives to working with Factory Furniture be proposed, proposals / working method to be included with tender return.
Detail design of benches and tables - including but not limited to concrete mix, supports for slats, lifting eyes, dowel to secure table supports, means of drainage, levelling shims - to be agreed with manufacturer and approved by University of Leeds Architectural Technical Officer prior to manufacture.
Drawings show a proposal to move a wayfinding point / sign presently on the site. This will be co-ordinated by the University if it goes ahead. If it doesn't, the spacing of the benches and orientation of bench B1 will be adjusted to suit (as shown in the feasibility document)
Drawings show a proposal for bespoke planters outside the Edward Boyle Library windows. Details and means of procurement of these are TBC and therefore do not form part of this contract.
Some details in the feasibility study have been superseded - where they contradict with other documents it is the other documents which should be referred to.
5. CPV Codes:
45000000 - Construction work.
6. NUTS Codes :
UKE42 - Leeds
7. Main Site or Location of Works, Main Place of Delivery or Main Place of Performance: Leeds,
8. Reference Attributed by the Awarding Authority:
9. Awarded to:
NRB Construction Management Ltd.
The Paper Hall, Anne Gate, Bradford, BD1 4EQ, United Kingdom
Tel. 01274 392 892
Attn: University of Leeds
Value Cost: 44,000
Is Awardee likely to subcontract?: No Awarded to SME?: Yes
10. Date of Contract Award: 02/11/2018
11. Number of Tenders Received: 2
12. Other Information:
Other Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
To view this notice, please click here:
https://neupc.delta-esourcing.com/delta/viewNotice.html?noticeId=361270520
TKR-20181127-PRO-13623683
Suitable for VCO: No
Procedure Type:OPEN
Period of Work Start date: 26/11/2018
Period of Work End date: 31/01/2019