Teesside University: GB-Middlesbrough: SME InnovaTIon Accelerator (TIA), ERDF funded

Teesside University is using Delta eSourcing to run this tender exercise

Notice Summary

Title:	GB-Middlesbrough: SME InnovaTIon Accelerator (TIA), ERDF funded
Notice type:	Competitive Contract Notice
Authority:	Teesside University
Nature of contract:	Not applicable
Procedure:	Not applicable
Short Description:	This is ERDF funded. A.Microfabrication Station UV Lamp: 365nm, Automated loading of wafer and exposure, adjustable power up to 44mW/cm2. Include virgin glass 5inches mask for exposure with plastic mask. Spin Coater: 12000rpm, polypropylene housing, vacuum chuck for wafer, vacuum chuck for fragments. Alignment tool, removable process chamber liner. Plasma Cleaner: Glass plate, high vacuum pump, interconnection tubing and fitting. B.Accessory kit for SU8 mould processing All items necessary to perform photolithography processes with liquid resins, including simple scotch tape, wafer stainless tweezer, silicon wafers, thermometer/hygrometer or macro-pipette. C.Accessory kit for PDMS micro-structured device replication All items necessary needed to perform PDMS micro-structured replication, including plastic petri dish, scalpel, microscope cover slide, blow air gun, syringe for chemical dispensing. D.Installation and Training Installation of the equipment with and options for both remote and on-site training on the global microfabrication process. A fume hood will be provided. E.Overall requirements The equipment set should allow creation of PDMS devices with feature sizes of 2M and have the capability of being easily upgraded and expanded as required. Documentation of microfabrication system should include explanation of correct use of the system and maintenance. The system with a one-year warranty and comply with all relevant university as well as national health and safety requirements. If a range of hardware is available that meet the requirements then indicate how each one meets the requirements.
Published:	19/08/2022 09:38

Please note that the deadline for response to this opportunity has passed. However, you can still register or log-into the Delta eSourcing solution to prepare your Supplier Profile for future opportunities.

View Full Notice

Competitive Contract Notice

1. Title: GB-Middlesbrough: SME InnovaTIon Accelerator (TIA), ERDF funded
2. Awarding Authority:
    Teesside University
    Southfield Road, Middlesbrough, TS1 3BX, United Kingdom
    Tel. 01642 218121, Email: tenders@tees.ac.uk, URL: www.tees.ac.uk
    Attn: Procurement
3. Contract Type: Supplies
      Sub Type: PURCHASE

4. Description: Semiconductors. This is ERDF funded.
A.Microfabrication Station
UV Lamp: 365nm, Automated loading of wafer and exposure, adjustable power up to 44mW/cm2. Include virgin glass 5inches mask for exposure with plastic mask.
Spin Coater: 12000rpm, polypropylene housing, vacuum chuck for wafer, vacuum chuck for fragments. Alignment tool, removable process chamber liner.
Plasma Cleaner: Glass plate, high vacuum pump, interconnection tubing and fitting.

B.Accessory kit for SU8 mould processing
All items necessary to perform photolithography processes with liquid resins, including simple scotch tape, wafer stainless tweezer, silicon wafers, thermometer/hygrometer or macro-pipette.

C.Accessory kit for PDMS micro-structured device replication
All items necessary needed to perform PDMS micro-structured replication, including plastic petri dish, scalpel, microscope cover slide, blow air gun, syringe for chemical dispensing.

D.Installation and Training
Installation of the equipment with and options for both remote and on-site training on the global microfabrication process. A fume hood will be provided.

E.Overall requirements
The equipment set should allow creation of PDMS devices with feature sizes of 2M and have the capability of being easily upgraded and expanded as required. Documentation of microfabrication system should include explanation of correct use of the system and maintenance. The system with a one-year warranty and comply with all relevant university as well as national health and safety requirements. If a range of hardware is available that meet the requirements then indicate how each one meets the requirements.
5. CPV Codes:
   31712330 - Semiconductors.

6. NUTS Codes :
   UKC1 - Tees Valley and Durham

7. Main Site or Location of Works, Main Place of Delivery or Main Place of Performance: Tees Valley and Durham,
8. Reference Attributed by the Awarding Authority: Q22.12
9. Estimated Value of Requirement: Category J: 25K to 50K
Currency: GBP
10. Deadline for Expression of Interest: 02/09/2022 17:00:00
11. Address to which they must be sent:
   Not Provided

12. Other Information:
Other Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://neupc.delta-esourcing.com/tenders/UK-GB-Middlesbrough:-SME-InnovaTIon-Accelerator-%28TIA%29%2C-ERDF-funded/9N6TN87527

To respond to this opportunity, please click here:
https://neupc.delta-esourcing.com/respond/9N6TN87527
TKR-2022819-PRO-20818417
Suitable for VCO: Yes
Procedure Type:ACCELERATED_NEGOTIATED
Period of Work Start date: 12/09/2022
Period of Work End date: 31/05/2023
Is this a Framework Agreement?: no

View any Notice Addenda

View Award Notice

Competitive Contract Award Notice

Associated Parent Notice
CompetitiveContractNotice - GB-Middlesbrough: SME InnovaTIon Accelerator (TIA), ERDF funded
1. Title: GB-Middlesbrough: SME InnovaTIon Accelerator (TIA), ERDF funded
2. Awarding Authority:
    Teesside University
    Southfield Road, Middlesbrough, TS1 3BX, United Kingdom
    Tel. 01642 218121, Email: tenders@tees.ac.uk, URL: www.tees.ac.uk
    Attn: Procurement
3. Contract Type: Supplies
      Sub Type: PURCHASE

4. Description: Semiconductors. This is ERDF funded.
A.Microfabrication Station
UV Lamp: 365nm, Automated loading of wafer and exposure, adjustable power up to 44mW/cm2. Include virgin glass 5inches mask for exposure with plastic mask.
Spin Coater: 12000rpm, polypropylene housing, vacuum chuck for wafer, vacuum chuck for fragments. Alignment tool, removable process chamber liner.
Plasma Cleaner: Glass plate, high vacuum pump, interconnection tubing and fitting.

B.Accessory kit for SU8 mould processing
All items necessary to perform photolithography processes with liquid resins, including simple scotch tape, wafer stainless tweezer, silicon wafers, thermometer/hygrometer or macro-pipette.

C.Accessory kit for PDMS micro-structured device replication
All items necessary needed to perform PDMS micro-structured replication, including plastic petri dish, scalpel, microscope cover slide, blow air gun, syringe for chemical dispensing.

D.Installation and Training
Installation of the equipment with and options for both remote and on-site training on the global microfabrication process. A fume hood will be provided.

E.Overall requirements
The equipment set should allow creation of PDMS devices with feature sizes of 2M and have the capability of being easily upgraded and expanded as required. Documentation of microfabrication system should include explanation of correct use of the system and maintenance. The system with a one-year warranty and comply with all relevant university as well as national health and safety requirements. If a range of hardware is available that meet the requirements then indicate how each one meets the requirements.
5. CPV Codes:
   31712330 - Semiconductors.

6. NUTS Codes :
   UKC1 - Tees Valley and Durham

7. Main Site or Location of Works, Main Place of Delivery or Main Place of Performance: Tees Valley and Durham,
8. Reference Attributed by the Awarding Authority: Q22.12
9. Awarded to:

    Elvesys
    172 rue de Charonne 75011, Paria, 75011, France
    Tel. +33 184 163 807
    Attn: Eric Farin
Value Cost: 35,985
Is Awardee likely to subcontract?: No Awarded to SME?: Yes
10. Date of Contract Award: 21/09/2022
11. Number of Tenders Received: 1
12. Other Information:
Other Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
To view this notice, please click here:
https://neupc.delta-esourcing.com/delta/viewNotice.html?noticeId=722576841
TKR-2022922-PRO-21001662
Suitable for VCO: Yes
Procedure Type:ACCELERATED_NEGOTIATED
Period of Work Start date: 23/09/2022
Period of Work End date: 31/05/2023