Skip to main content.

Teesside University: GB-Middlesbrough: ERDF - Smart Tuyere Sensor for Peel Jones Copper Products Ltd

  Teesside University is using Delta eSourcing to run this tender exercise

Notice Summary
Title: GB-Middlesbrough: ERDF - Smart Tuyere Sensor for Peel Jones Copper Products Ltd
Notice type: Competitive Contract Notice
Authority: Teesside University
Nature of contract: Not applicable
Procedure: Not applicable
Short Description: ERDF funded - Peel Jones Copper Products (PJCP) recently completed a Knowledge Transfer Partnership to investigate opportunities to optimise the performance of blast furnaces through innovative design and manufacture of blast furnace castings, utilising materials processing optimisation, embedded monitoring systems and advanced manufacturing processes. This provided the understanding of Tuyere failure and the ability to predict failure by measuring wear of pure copper from within the Blast Furnace which would offer a significant USP to differentiate PJCP from its competitors. It also instigated discussions regarding a live blast furnace trial of the sensor, with a well-established blast furnace operator, who have provided a Letter of Support confirming their interest in the solution and intent to support a formal trial. Preliminary investigation into the likely stages and costs required to move to commercialisation of this innovative product has informed this tender. It was confirmed that sensor technology for measuring wear on copper products could very likely be achieved using a novel sensor array. The approach would need to combat the challenge of measurement of copper which is traditionally difficult, in the high temperature environment of a blast furnace (2000C). Therefore, the specification for this project is to develop a prototype SMART Tuyere sensor, to address these challenges and provide a cost effective solution
Published: 06/10/2020 12:08

View Full Notice

Competitive Contract Notice

1. Title: GB-Middlesbrough: ERDF - Smart Tuyere Sensor for Peel Jones Copper Products Ltd
2. Awarding Authority:
    Teesside University
    Borough Road, Middlesbrough, TS1 3BX, United Kingdom
    Tel. 01642 218121, Email: tenders@tees.ac.uk, URL: www.tees.ac.uk
    Attn: Procurement
3. Contract Type: Supplies
      Sub Type: PURCHASE

4. Description: Information technology services. Engineering services. ERDF funded - Peel Jones Copper Products (PJCP) recently completed a Knowledge Transfer Partnership to investigate opportunities to optimise the performance of blast furnaces through innovative design and manufacture of blast furnace castings, utilising materials processing optimisation, embedded monitoring systems and advanced manufacturing processes.
This provided the understanding of Tuyere failure and the ability to predict failure by measuring wear of pure copper from within the Blast Furnace which would offer a significant USP to differentiate PJCP from its competitors. It also instigated discussions regarding a live blast furnace trial of the sensor, with a well-established blast furnace operator, who have provided a Letter of Support confirming their interest in the solution and intent to support a formal trial.
Preliminary investigation into the likely stages and costs required to move to commercialisation of this innovative product has informed this tender. It was confirmed that sensor technology for measuring wear on copper products could very likely be achieved using a novel sensor array. The approach would need to combat the challenge of measurement of copper which is traditionally difficult, in the high temperature environment of a blast furnace (2000C). Therefore, the specification for this project is to develop a prototype SMART Tuyere sensor, to address these challenges and provide a cost effective solution
5. CPV Codes:
   72222300 - Information technology services.
   71300000 - Engineering services.

6. NUTS Codes :
   UKC1 - Tees Valley and Durham

7. Main Site or Location of Works, Main Place of Delivery or Main Place of Performance: Tees Valley and Durham,
8. Reference Attributed by the Awarding Authority: 20.21
9. Estimated Value of Requirement: Category K:10K to 25K
Currency: GBP
10. Deadline for Expression of Interest: 21/10/2020 17:00:00
11. Address to which they must be sent:
   Not Provided
   
12. Other Information:
Other Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://neupc.delta-esourcing.com/tenders/UK-GB-Middlesbrough:-ERDF---Smart-Tuyere-Sensor-for-Peel-Jones-Copper-Products-Ltd/8RC883JUU6

To respond to this opportunity, please click here:
https://neupc.delta-esourcing.com/respond/8RC883JUU6
TKR-2020106-PRO-17180902
Suitable for VCO: Yes
Procedure Type:OPEN
Period of Work Start date: 26/10/2020
Period of Work End date: 30/04/2021
Is this a Framework Agreement?: no

View any Notice Addenda

View Award Notice

Competitive Contract Award Notice

Associated Parent Notice
CompetitiveContractNotice - GB-Middlesbrough: ERDF - Smart Tuyere Sensor for Peel Jones Copper Products Ltd
1. Title: GB-Middlesbrough: ERDF - Smart Tuyere Sensor for Peel Jones Copper Products Ltd
2. Awarding Authority:
    Teesside University
    Borough Road, Middlesbrough, TS1 3BX, United Kingdom
    Tel. 01642 218121, Email: tenders@tees.ac.uk, URL: www.tees.ac.uk
    Attn: Procurement
3. Contract Type: Supplies
      Sub Type: PURCHASE

4. Description: Information technology services. Engineering services. ERDF funded - Peel Jones Copper Products (PJCP) recently completed a Knowledge Transfer Partnership to investigate opportunities to optimise the performance of blast furnaces through innovative design and manufacture of blast furnace castings, utilising materials processing optimisation, embedded monitoring systems and advanced manufacturing processes.
This provided the understanding of Tuyere failure and the ability to predict failure by measuring wear of pure copper from within the Blast Furnace which would offer a significant USP to differentiate PJCP from its competitors. It also instigated discussions regarding a live blast furnace trial of the sensor, with a well-established blast furnace operator, who have provided a Letter of Support confirming their interest in the solution and intent to support a formal trial.
Preliminary investigation into the likely stages and costs required to move to commercialisation of this innovative product has informed this tender. It was confirmed that sensor technology for measuring wear on copper products could very likely be achieved using a novel sensor array. The approach would need to combat the challenge of measurement of copper which is traditionally difficult, in the high temperature environment of a blast furnace (2000C). Therefore, the specification for this project is to develop a prototype SMART Tuyere sensor, to address these challenges and provide a cost effective solution
5. CPV Codes:
   72222300 - Information technology services.
   71300000 - Engineering services.

6. NUTS Codes :
   UKC1 - Tees Valley and Durham

7. Main Site or Location of Works, Main Place of Delivery or Main Place of Performance: Tees Valley and Durham,
8. Reference Attributed by the Awarding Authority: 20.21
9. Awarded to:

    Teesside University
    Southfield Road, Middlesbrough, TS1 3BX, United Kingdom
    Tel. 01642 384575
    Attn: Rachel Frampton
Value Cost: 16,558
Is Awardee likely to subcontract?: No Awarded to SME?: No
10. Date of Contract Award: 12/11/2020
11. Number of Tenders Received: 1
12. Other Information:
Other Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
To view this notice, please click here:
https://neupc.delta-esourcing.com/delta/viewNotice.html?noticeId=543395758
TKR-20201113-PRO-17368036
Suitable for VCO: Yes
Procedure Type:OPEN
Period of Work Start date: 16/11/2020
Period of Work End date: 30/04/2021