Skip to main content.

University of Derby: GB-Derby: Design Consultancy – Real-Time Hardware in the Loop and Rapid Controller Development

  University of Derby is using Delta eSourcing to run this tender exercise

Notice Summary
Title: GB-Derby: Design Consultancy – Real-Time Hardware in the Loop and Rapid Controller Development
Notice type: Competitive Contract Notice
Authority: University of Derby
Nature of contract: Not applicable
Procedure: Not applicable
Short Description: The University of Derby has secured Local Growth Funding to establish a Rail Innovation Centre with three Technical Demonstrators aimed at encouraging innovation and collaboration between businesses and their local university. The purpose of this tender is to procure the core capital equipment to establish the third demonstrator titled “Future Rail Propulsion”. This demonstrator will provide a Hardware-in-the-loop test and development rig, which will be expandable in future to allow different power units to be integrated to create propulsion systems. The systems are expected to include: •A reconfigurable rolling stock test rig with full system integration to allow the use of both real inputs and simulated data inputs to establish experimental cases. •Full instrumentation and Hardware-in-the-loop monitoring of the test rig to allow data capture during tests. •Traction delivery by electric motors, able to be powered by a range of technologies, to include versions and combinations of the following (for example and not exhaustive): oBattery systems oSupercapacitor systems oHydrogen fuel cell systems oDiesel generator systems •An instrumented regenerative braking system to allow the evaluation of system performance under different power sources (as above) and simulated use situations. •A systems integration suite to allow monitoring and control systems to be developed in hardware and software. •A simulation environment to study the impact of electrification on the wider energy grid network. •A separate, standalone and portable monitoring system for use on existing test rigs.
Published: 25/01/2019 10:00
Please note that the deadline for response to this opportunity has passed. However, you can still register or log-into the Delta eSourcing solution to prepare your Supplier Profile for future opportunities.

View Full Notice

Competitive Contract Notice

1. Title: GB-Derby: Design Consultancy – Real-Time Hardware in the Loop and Rapid Controller Development
2. Awarding Authority:
    UNIVERSITY OF DERBY
    Kedleston Road, Derby, DE22 1GB, United Kingdom
    Tel. 01332 592401, Email: a.lawrence@derby.ac.uk, URL: www.derby.ac.uk
    Contact: Alex Lawrence, Attn: Alex Lawrence
3. Contract Type: Supplies
      Sub Type: PURCHASE

4. Description: Data-processing machines (hardware). Hardware consultancy services. The University of Derby has secured Local Growth Funding to establish a Rail Innovation Centre with three Technical Demonstrators aimed at encouraging innovation and collaboration between businesses and their local university.
The purpose of this tender is to procure the core capital equipment to establish the third demonstrator titled “Future Rail Propulsion”. This demonstrator will provide a Hardware-in-the-loop test and development rig, which will be expandable in future to allow different power units to be integrated to create propulsion systems. The systems are expected to include:
•A reconfigurable rolling stock test rig with full system integration to allow the use of both real inputs and simulated data inputs to establish experimental cases.
•Full instrumentation and Hardware-in-the-loop monitoring of the test rig to allow data capture during tests.
•Traction delivery by electric motors, able to be powered by a range of technologies, to include versions and combinations of the following (for example and not exhaustive):
oBattery systems
oSupercapacitor systems
oHydrogen fuel cell systems
oDiesel generator systems
•An instrumented regenerative braking system to allow the evaluation of system performance under different power sources (as above) and simulated use situations.
•A systems integration suite to allow monitoring and control systems to be developed in hardware and software.
•A simulation environment to study the impact of electrification on the wider energy grid network.
•A separate, standalone and portable monitoring system for use on existing test rigs.
5. CPV Codes:
   30210000 - Data-processing machines (hardware).
   72100000 - Hardware consultancy services.

6. NUTS Codes :
   UKF11 - Derby

7. Main Site or Location of Works, Main Place of Delivery or Main Place of Performance: Derby,
8. Reference Attributed by the Awarding Authority:
9. Estimated Value of Requirement: Category I: 50K to 100K
Currency: GBP
10. Deadline for Expression of Interest: 08/02/2019 14:00:00
11. Address to which they must be sent:
    UNIVERSITY OF DERBY
    Kedleston Road, Derby, DE22 1GB, United Kingdom
    Tel. 01332 592401, Email: a.lawrence@derby.ac.uk, URL: www.derby.ac.uk
    Contact: Alex Lawrence, Attn: Alex Lawrence
   
12. Other Information:
Other Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://neupc.delta-esourcing.com/tenders/UK-GB-Derby:-Design-Consultancy-%E2%80%93-Real-Time-Hardware-in-the-Loop-and-Rapid-Controller-Development/55Y6R54T6V

To respond to this opportunity, please click here:
https://neupc.delta-esourcing.com/respond/55Y6R54T6V
TKR-2019125-PRO-13945904
Suitable for VCO: No
Procedure Type:OPEN
Period of Work Start date: 22/02/2019
Period of Work End date: 31/03/2019
Is this a Framework Agreement?: no

View any Notice Addenda

Competitive Contract Notice Addendum

Associated Parent Notice
CompetitiveContractNotice - GB-Derby: Design Consultancy – Real-Time Hardware in the Loop and Rapid Controller Development
1. Title: GB-Derby: Design Consultancy – Real-Time Hardware in the Loop and Rapid Controller Development
2. Awarding Authority:
    UNIVERSITY OF DERBY
    Kedleston Road, Derby, DE22 1GB, United Kingdom
    Tel. 01332 592401, Email: a.lawrence@derby.ac.uk, URL: www.derby.ac.uk
    Contact: Alex Lawrence, Attn: Alex Lawrence
      Sub Type: PURCHASE

4. Description: Data-processing machines (hardware). Hardware consultancy services. The University of Derby has secured Local Growth Funding to establish a Rail Innovation Centre with three Technical Demonstrators aimed at encouraging innovation and collaboration between businesses and their local university.
The purpose of this tender is to procure the core capital equipment to establish the third demonstrator titled “Future Rail Propulsion”. This demonstrator will provide a Hardware-in-the-loop test and development rig, which will be expandable in future to allow different power units to be integrated to create propulsion systems. The systems are expected to include:
•A reconfigurable rolling stock test rig with full system integration to allow the use of both real inputs and simulated data inputs to establish experimental cases.
•Full instrumentation and Hardware-in-the-loop monitoring of the test rig to allow data capture during tests.
•Traction delivery by electric motors, able to be powered by a range of technologies, to include versions and combinations of the following (for example and not exhaustive):
oBattery systems
oSupercapacitor systems
oHydrogen fuel cell systems
oDiesel generator systems
•An instrumented regenerative braking system to allow the evaluation of system performance under different power sources (as above) and simulated use situations.
•A systems integration suite to allow monitoring and control systems to be developed in hardware and software.
•A simulation environment to study the impact of electrification on the wider energy grid network.
•A separate, standalone and portable monitoring system for use on existing test rigs.
5. CPV Codes:
   30210000 - Data-processing machines (hardware).
   72100000 - Hardware consultancy services.

6. NUTS Codes :
   UKF11 - Derby

7. Main Site or Location of Works, Main Place of Delivery or Main Place of Performance: Derby,
8. Reference Attributed by the Awarding Authority:
9. Estimated Value of Requirement: Category I: 50K to 100K
Currency: GBP
10. Deadline for Expression of Interest: 28/02/2019 14:00:00
11. Address to which they must be sent:
    UNIVERSITY OF DERBY
    Kedleston Road, Derby, DE22 1GB, United Kingdom
    Tel. 01332 592401, Email: a.lawrence@derby.ac.uk, URL: www.derby.ac.uk
    Contact: Alex Lawrence, Attn: Alex Lawrence
   
12. Other Information:
Other Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
To view this notice, please click here:
https://neupc.delta-esourcing.com/delta/viewNotice.html?noticeId=378007062

13. Description of Amendment / Addition: The new closing date for this tender is 5th March 2019 TKR-2019219-PRO-14123643

Suitable for VCO: No
Procedure Type:OPEN
Period of Work Start date: 08/03/2019
Period of Work End date: 31/03/2019



Complementary Information
Funding:
Is this a Framework Agreement?: no

View Award Notice