Skip to main content.

University of Leeds: Electron Beam Evaporator Physical Vapour Deposition System

  University of Leeds is using Delta eSourcing to run this tender exercise

Notice Summary
Title: Electron Beam Evaporator Physical Vapour Deposition System
Notice type: Contract Notice
Authority: University of Leeds
Nature of contract: Supplies
Procedure: Open
Short Description: The School of Electronic and Electrical Engineering at the University of Leeds is seeking tenders for an electron-beam evaporator physical vapour deposition system for depositing metals.
Published: 30/10/2017 12:35
Please note that the deadline for response to this opportunity has passed. However, you can still register or log-into the Delta eSourcing solution to prepare your Supplier Profile for future opportunities.

View Full Notice

UK-Leeds: Laboratory, optical and precision equipments (excl. glasses).
Section I: Contracting Authority
      I.1) Name and addresses
             University of Leeds
             Purchasing Office, 1 - 3 Lifton Villas, Lifton Place, Leeds, LS2 9JZ, United Kingdom
             Tel. +44 1133434104, Email: m.a.whitworth@adm.leeds.ac.uk
             Contact: Maggie Whitworth
             Main Address: https://www.leeds.ac.uk
             NUTS Code: UKE42
      I.2) Joint procurement
      The contract involves joint procurement: No.
      In the case of joint procurement involving different countries, state applicable national procurement law: Not provided       
      The contract is awarded by a central purchasing body: No.
      I.3) Communication
      The procurement documents are available for unrestricted and full direct access, free of charge, at: http://www.delta-esourcing.com/tenders/UK-UK-Leeds:-Laboratory%2C-optical-and-precision-equipments-%28excl.-glasses%29./52KJRK9X9T
      Additional information can be obtained from: the abovementioned address
      Tenders or requests to participate must be sent electronically via http://www.delta-esourcing.com/tenders/UK-title/52KJRK9X9T to the abovementioned address       
      Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at: Not provided
      I.4) Type of the contracting authority
            Body governed by public law
      I.5) Main activity
            Education

Section II: Object
II.1) Scope of the procurement
      II.1.1) Title: Electron Beam Evaporator Physical Vapour Deposition System       
      Reference Number: e/2966
      II.1.2) Main CPV Code:
      38000000 - Laboratory, optical and precision equipments (excl. glasses).

      II.1.3) Type of contract: SUPPLIES
      II.1.4) Short description: The School of Electronic and Electrical Engineering at the University of Leeds is seeking tenders for an electron-beam evaporator physical vapour deposition system for depositing metals.       
      II.1.5) Estimated total value:
      Value excluding VAT: Not Provided       
      Currency: Not Provided
      II.1.6) Information about lots:
      This contract is divided into lots: No       
   
II.2) Description
      
      II.2.2) Additional CPV codes:
      Not Provided       
      II.2.3) Place of performance:
      UKE42 Leeds
      
      II.2.4) Description of procurement: 1 system
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: Not provided       
      Currency: Not provided       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 36       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       No             
      Description of options: Not provided
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Not provided       


Section III: Legal, Economic, Financial And Technical Information
   III.1) Conditions for participation
      III.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
      List and brief description of conditions:          
      Not Provided       
      III.1.2) Economic and financial standing       
      List and brief description of selection criteria:       
      Not Provided    
      Minimum level(s) of standards possibly required (if applicable) :       
      Not Provided    
      III.1.3) Technical and professional ability
      List and brief description of selection criteria:       
      Not Provided      
      Minimum level(s) of standards possibly required (if applicable) :          
      Not Provided   
      III.1.5) Information about reserved contracts (if applicable)   
      The contract is reserved to sheltered workshops and economic operators aiming at the social and professional integration of disabled or disadvantaged persons: No       
      The execution of the contract is restricted to the framework of sheltered employment programmes: No    
      
   III.2) Conditions related to the contract
         
      III.2.2) Contract performance conditions       
      Joint bidders will be jointly and severally liable.          
      III.2.3) Information about staff responsible for the performance of the contract
      Obligation to indicate the names and professional qualifications of the staff assigned to performing the contract: No

Section IV: Procedure
   IV.1) Description OPEN
      IV.1.1) Type of procedure: Open   
   
   IV.1.3) Information about a framework agreement or a dynamic purchasing system    
         The procurement involves the establishment of a framework agreement - NO    
         In the case of framework agreements justification for any duration exceeding 4 years: Not Provided    
   
   
   IV.1.6) Information about electronic auction:
      An electronic auction will be used: No
      Additional information about electronic auction: Not provided
   IV.1.8) Information about the Government Procurement Agreement (GPA)
      The procurement is covered by the Government Procurement Agreement: Yes       
   IV.2) Administrative information
      IV.2.1) Previous publication concerning this procedure:
         Notice number in the OJ S: Not provided       
      IV.2.2) Time limit for receipt of tenders or requests to participate
       Date: 30/11/2017 Time: 12:00
            
      IV.2.4) Languages in which tenders or requests to participate may be submitted: English,       
      IV.2.6) Minimum time frame during which the tenderer must maintain the tender:
         Duration in month(s): 4
      
      IV.2.7) Conditions for opening of tenders:
         Date: 06/12/2017
         Time: 12:00
      

Section VI: Complementary Information
   VI.1) Information about recurrence
   This is a recurrent procurement: No    
   Estimated timing for further notices to be published: Not provided
   VI.2) Information about electronic workflows
   Electronic ordering will be used No       
   Electronic invoicing will be accepted No       
   Electronic payment will be used No       
   VI.3) Additional Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://neupc.delta-esourcing.com/tenders/UK-UK-Leeds:-Laboratory%2C-optical-and-precision-equipments-%28excl.-glasses%29./52KJRK9X9T

To respond to this opportunity, please click here:
https://neupc.delta-esourcing.com/respond/52KJRK9X9T
   VI.4) Procedures for review
   VI.4.1) Review body:
             High Courts of England & Wales
       Strand, London, United Kingdom
   VI.4.2) Body responsible for mediation procedures:
             University of Leeds
          Purchasing Office, 1 - 3 Lifton Villas, Lifton Place, Leeds, LS2 9JZ, United Kingdom
          Tel. +44 01133434104, Email: centralpurchasing@adm.leeds.ac.uk
   VI.4.3) Review procedure
   Precise information on deadline(s) for review procedures:    
    The University will incorporate a standstill period at the point at which the award of contract is communicated totenderers. That notification will provide full information on the award decision. The standstill period, which will befro a minimum of 10 calendar days, provides time fro unsuccessful tenderers to challenge the award decisionbefore the contract is entered into.    
   VI.4.4) Service from which information about the lodging of appeals may be obtained:
          University of Leeds
       Purchasing Office, 1 - 3 Lifton Villas, Lifton Place, Leeds, LS2 9JZ, United Kingdom
       Tel. +44 1133434104
   VI.5) Date Of Dispatch Of This Notice: 30/10/2017

Annex A


View any Notice Addenda

View Award Notice

UK-Leeds: Laboratory, optical and precision equipments (excl. glasses).

Section I: Contracting Authority

   I.1) Name, Addresses and Contact Point(s):
       University of Leeds
       Purchasing Office, 1 - 3 Lifton Villas, Lifton Place, Leeds, LS2 9JZ, United Kingdom
       Tel. +44 1133434104, Email: m.a.whitworth@adm.leeds.ac.uk
       Contact: Maggie Whitworth
       Main Address: https://www.leeds.ac.uk
       NUTS Code: UKE42

   I.2) Joint procurement:
      The contract involves joint procurement: No          
      In the case of joint procurement involving different countries, state applicable national procurement law: Not Provided
      The contract is awarded by a central purchasing body: No

   I.4)Type of the contracting authority:
      Body governed by public law

   I.5) Main activity:
      Education

Section II: Object Of The Contract

   II.1) Scope of the procurement

      II.1.1) Title: Electron Beam Evaporator Physical Vapour Deposition System            
      Reference number: e/2966

      II.1.2) Main CPV code:
         38000000 - Laboratory, optical and precision equipments (excl. glasses).


      II.1.3) Type of contract: SUPPLIES

      II.1.4) Short description: Notice of the AWARD of a contract for an electron-beam evaporator physical vapour deposition system for depositing metals.

      II.1.6) Information about lots
         This contract is divided into lots: No
            
      II.1.7) Total value of the procurement (excluding VAT)
          Lowest offer: 212,642 / Highest offer:336,365         
         Currency:EUR            

   II.2) Description

      II.2.2) Additional CPV code(s):
      Not Provided

      II.2.3) Place of performance
      Nuts code:
      UKE42 - Leeds
   
      Main site or place of performance:
      Leeds
             

      II.2.4) Description of the procurement: 1 system

      II.2.5) Award criteria:
      Quality criterion - Name: Technical capability / Weighting: 45
      Quality criterion - Name: Aftersales service and technical support / Weighting: 25
      Quality criterion - Name: Lead time to purchase / Weighting: 20
      Quality criterion - Name: Sustainability questionnaire score / Weighting: 10
                  
      Price - Weighting: 10
            

      II.2.11) Information about options
         Options: No
         

      II.2.13) Information about European Union funds
         The procurement is related to a project and/or programme financed by European Union funds: No
         

      II.2.14) Additional information: Not Provided


Section IV: Procedure

IV.1) Description

   IV.1.1)Type of procedure: Open


   IV.1.3) Information about a framework agreement or a dynamic purchasing system
      The procurement involves the establishment of a framework agreement: No       
      

   IV.1.6) Information about electronic auction
      An electronic auction has been used: No

   IV.1.8) Information about the Government Procurement Agreement (GPA)
      The procurement is covered by the Government Procurement Agreement: Yes

IV.2) Administrative information

   IV.2.1) Previous publication concerning this procedure
       Notice number in the OJEU: 2017/S 210-435702
      
   

   IV.2.9) Information about termination of call for competition in the form of a prior information notice
      The contracting authority will not award any further contracts based on the above prior information notice: No

Section V: Award of contract

Award Of Contract (No.1)

   Contract No: Not Provided    
   Lot Number: Not Provided    
   Title: Not Provided

   A contract/lot is awarded: Yes


   V.2) Award of contract

      V.2.1) Date of conclusion of the contract: 14/06/2018

      V.2.2) Information about tenders
         Number of tenders received: 6
         Number of tenders received from SMEs: Not Provided          
         Number of tenders received from tenderers from other EU Member States: Not Provided          
         Number of tenders received from tenderers from non-EU Member States: Not Provided          
         Number of tenders received by electronic means: Not Provided

      V.2.3) Name and address of the contractor

      The contract has been awarded to a group of economic operators: No
         
         Contractor (No.1)
             Angstrom Engineering
             91 Trillium Drive, Kitchener, Kitchener, Canada
             NUTS Code: UKE42
            The contractor is an SME: Yes

      V.2.4) Information on value of the contract/lot (excluding VAT)
         Initial estimated total value of the contract/lot: Not Provided          
         Lowest offer: 212,642 / Highest offer: 336,365
         Currency: EUR

      V.2.5) Information about subcontracting
         The contract is likely to be subcontracted: No
         
Section VI: Complementary information

   VI.3) Additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
To view this notice, please click here:
https://neupc.delta-esourcing.com/delta/viewNotice.html?noticeId=327659832

   VI.4) Procedures for review

      VI.4.1) Review body
          High Courts of England & Wales
          Strand, London, United Kingdom

      VI.4.2) Body responsible for mediation procedures
          University of Leeds
          Purchasing Office, 1 - 3 Lifton Villas, Lifton Place, Leeds, LS2 9JZ, United Kingdom
          Tel. +44 01133434104, Email: centralpurchasing@adm.leeds.ac.uk

      VI.4.3) Review procedure
         Precise information on deadline(s) for review procedures: The University will incorporate a standstill period at the point at which the award of contract is communicated totenderers. That notification will provide full information on the award decision. The standstill period, which will befro a minimum of 10 calendar days, provides time fro unsuccessful tenderers to challenge the award decisionbefore the contract is entered into.

      VI.4.4) Service from which information about the review procedure may be obtained
          University of Leeds
          Purchasing Office, 1 - 3 Lifton Villas, Lifton Place, Leeds, LS2 9JZ, United Kingdom
          Tel. +44 1133434104

   VI.5) Date of dispatch of this notice: 15/06/2018