Skip to main content.

University of Leeds: 3121 - Environmental Chamber

  University of Leeds is using Delta eSourcing to run this tender exercise

Notice Summary
Title: 3121 - Environmental Chamber
Notice type: Contract Notice
Authority: University of Leeds
Nature of contract: Not applicable
Procedure: Negotiated
Short Description: The School of Civil Engineering wishes to procure a custom built environmental chamber used for bioaerosol research activities. This call is to invite expressions of interest to design, supply, install and commission the environmental chamber. The successful vendor will also be expected to provide a comprehensive maintenance contract for the chamber. Vendors must be aware that the chamber, must be installed, completed, commissioned and in service by31st July 2018.
Published: 23/01/2018 16:21
Please note that the deadline for response to this opportunity has passed. However, you can still register or log-into the Delta eSourcing solution to prepare your Supplier Profile for future opportunities.

View Full Notice

UK-Leeds: Research, testing and scientific technical simulator.
Section I: Contracting Authority
      I.1) Name and addresses
             University of Leeds
             Purchasing Office, 1 - 3 Lifton Villas, Lifton Place, Leeds, LS2 9JZ, United Kingdom
             Tel. +44 1133434104, Email: centralpurchasing@adm.leeds.ac.uk
             Contact: Maggie Whitworth
             Main Address: https://www.leeds.ac.uk
             NUTS Code: UKE42
      I.2) Joint procurement
      The contract involves joint procurement: No.
      In the case of joint procurement involving different countries, state applicable national procurement law: Not provided       
      The contract is awarded by a central purchasing body: No.
      I.3) Communication
      The procurement documents are available for unrestricted and full direct access, free of charge, at: https://neupc.delta-esourcing.com/tenders/UK-title/44J68G6PH4
      Additional information can be obtained from: the abovementioned address
      Tenders or requests to participate must be sent electronically via https://neupc.delta-esourcing.com/respond/44J68G6PH4 to the abovementioned address       
      Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at: Not provided
      I.4) Type of the contracting authority
            Body governed by public law
      I.5) Main activity
            Education

Section II: Object
II.1) Scope of the procurement
      II.1.1) Title: 3121 - Environmental Chamber       
      Reference Number: 3121
      II.1.2) Main CPV Code:
      38970000 - Research, testing and scientific technical simulator.

      II.1.3) Type of contract: SUPPLIES
      II.1.4) Short description: The School of Civil Engineering wishes to procure a custom built environmental chamber used for bioaerosol research activities. This call is to invite expressions of interest to design, supply, install and commission the environmental chamber. The successful vendor will also be expected to provide a comprehensive maintenance contract for the chamber.

Vendors must be aware that the chamber, must be installed, completed, commissioned and in service by31st July 2018.       
      II.1.5) Estimated total value:
      Value excluding VAT: 230,000       
      Currency: GBP
      II.1.6) Information about lots:
      This contract is divided into lots: No       
   
II.2) Description
      
      II.2.2) Additional CPV codes:
      Not Provided       
      II.2.3) Place of performance:
      UKE42 Leeds
      
      II.2.4) Description of procurement: The School of Civil Engineering wishes to procure a custom built environmental chamber used for bioaerosol research activities. This call is to invite expressions of interest to design, supply, install and commission the environmental chamber. The successful vendor will also be expected to provide a comprehensive maintenance contract for the chamber.

Vendors must be aware that the chamber, must be installed, completed, commissioned and in service by31st July 2018.
      II.2.5) Award criteria:
            Price is not the only award criterion and all criteria are stated only in the procurement documents            
      II.2.6) Estimated value:
      Value excluding VAT: 230,000       
      Currency: GBP       
      II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
      Duration in months: 60       
      This contract is subject to renewal: No       
      Description of renewals: Not provided
      II.2.9) Information about the limits on the number of candidates to be invited:
             Envisaged minimum number: 3
             
      Objective criteria for choosing the limited number of candidates: Not provided
      II.2.10) Information about variants:
      Variants will be accepted: No
      II.2.11) Information about options:
      Options:       No             
      Description of options: Not provided
      II.2.12) Information about electronic catalogues:
      Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
      II.2.13) Information about European Union funds:
      The procurement is related to a project and/or programme financed by European Union funds: No       
      Identification of the project: Not provided             
      II.2.14) Additional information: Not provided       


Section III: Legal, Economic, Financial And Technical Information
   III.1) Conditions for participation
      III.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
      List and brief description of conditions:          
      Bidders should provide evidence using the Standard Questionnaire Stage    
      III.1.2) Economic and financial standing       
      List and brief description of selection criteria:
      Bidders should provide evidence using the Standard Questionnaire Stage    
      Minimum level(s) of standards possibly required (if applicable) :       
      Not Provided    
      III.1.3) Technical and professional ability
      List and brief description of selection criteria:       
      Bidders should provide evidence using the Standard Questionnaire Stage    
      Minimum level(s) of standards possibly required (if applicable) :          
      Not Provided   
      III.1.5) Information about reserved contracts (if applicable)   
      The contract is reserved to sheltered workshops and economic operators aiming at the social and professional integration of disabled or disadvantaged persons: No       
      The execution of the contract is restricted to the framework of sheltered employment programmes: No    
      
   III.2) Conditions related to the contract
         
      III.2.2) Contract performance conditions       
      Joint bidders shall be jointly and severally liable          
      III.2.3) Information about staff responsible for the performance of the contract
      Obligation to indicate the names and professional qualifications of the staff assigned to performing the contract: Yes    

Section IV: Procedure
   IV.1) Description NEGOTIATED
      IV.1.1) Type of procedure:   
      Justification for the choice of accelerated procedure: The conditions of funding for this item are that the requirement must be fully delivered and installed by 31 July 2018. We have chose the accelerated procedure to enable us to meet this funding deadline   
   IV.1.3) Information about a framework agreement or a dynamic purchasing system    
         The procurement involves the establishment of a framework agreement - NO    
         In the case of framework agreements justification for any duration exceeding 4 years: Not Provided    
   IV.1.4) Information about reduction of the number of solutions or tenders during negotiation or dialogue: No.
   IV.1.5) Information about negotiation: No.
   IV.1.6) Information about electronic auction:
      An electronic auction will be used: No
      Additional information about electronic auction: Not provided
   IV.1.8) Information about the Government Procurement Agreement (GPA)
      The procurement is covered by the Government Procurement Agreement: Yes       
   IV.2) Administrative information
      IV.2.1) Previous publication concerning this procedure:
         Notice number in the OJ S: Not provided       
      IV.2.2) Time limit for receipt of tenders or requests to participate
       Date: 08/02/2018 Time: 12:00
      IV.2.3) Estimated date of dispatch of invitations to tender or to participate to selected candidates: Not Provided       
      IV.2.4) Languages in which tenders or requests to participate may be submitted: English,       
      IV.2.6) Minimum time frame during which the tenderer must maintain the tender:
         Duration in month(s): 4
      
      

Section VI: Complementary Information
   VI.1) Information about recurrence
   This is a recurrent procurement: No    
   Estimated timing for further notices to be published: Not provided
   VI.2) Information about electronic workflows
   Electronic ordering will be used Yes       
   Electronic invoicing will be accepted No       
   Electronic payment will be used Yes       
   VI.3) Additional Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.

To access the SQ please use the linkhttps://neupc.delta-esourcing.com/tenders/UK-title/44J68G6PH4
To access the ITN documentation, please use the link https://neupc.delta-esourcing.com/respond/542YJZX5KB
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://neupc.delta-esourcing.com/tenders/UK-UK-Leeds:-Research%2C-testing-and-scientific-technical-simulator./44J68G6PH4

To respond to this opportunity, please click here:
https://neupc.delta-esourcing.com/respond/44J68G6PH4
   VI.4) Procedures for review
   VI.4.1) Review body:
             High Courts of England & Wales
       Strand, London, United Kingdom
   VI.4.2) Body responsible for mediation procedures:
             University of Leeds
          Purchasing Office, 1 - 3 Lifton Villas, Lifton Place, Leeds, LS2 9JZ, United Kingdom
          Tel. +44 1133431810, Email: m.a.whitworth@adm.leeds.ac.uk
   VI.4.3) Review procedure
   Precise information on deadline(s) for review procedures:    
    Not Provided    
   VI.4.4) Service from which information about the lodging of appeals may be obtained:
          University of Leeds
       Purchasing Office, 1 - 3 Lifton Villas, Lifton Place, Leeds, LS2 9JZ, United Kingdom
       Tel. +44 1133434104
   VI.5) Date Of Dispatch Of This Notice: 23/01/2018

Annex A


View any Notice Addenda

UK-Leeds: Research, testing and scientific technical simulator.

Section I: Contracting authority/entity (as stated in the original notice)

I.1) Name and addresses
       University of Leeds
       Purchasing Office, 1 - 3 Lifton Villas, Lifton Place, Leeds, LS2 9JZ, United Kingdom
       Tel. +44 1133434104, Email: centralpurchasing@adm.leeds.ac.uk
       Contact: Maggie Whitworth
       Main Address: https://www.leeds.ac.uk
       NUTS Code: UKE42

Section II: Object (as stated in the original notice)

II.1) Scope of the procurement
   
   II.1.1) Title: 3121 - Environmental Chamber      Reference number: 3121      
   II.1.2) Main CPV code:
      38970000 - Research, testing and scientific technical simulator.
   
   II.1.3) Type of contract: SUPPLIES   
   II.1.4) Short Description: The School of Civil Engineering wishes to procure a custom built environmental chamber used for bioaerosol research activities. This call is to invite expressions of interest to design, supply, install and commission the environmental chamber. The successful vendor will also be expected to provide a comprehensive maintenance contract for the chamber.

Vendors must be aware that the chamber, must be installed, completed, commissioned and in service by31st July 2018.

Section VI: Complementary information

V1.5) Date of dispatch of this notice: 09/02/2018

VI.6) Original notice reference:

   Notice Reference:    2018 - 217038   
   Notice number in OJ S: Not Provided
   Date of dispatch of the original notice: 23/01/2018

Section VII: Changes

VII.1) Information to be changed or added

      VII.1.1) Reason for change: Modification of original information submitted by the contracting authority    
      
      VII.1.2) Text to be corrected in original notice No: 1
                                    
         Section Number: IV.2.2)          
         Place of text to be modified: IV.2.2) Time limit for receipt of tenders or requests to participate          
         Instead of:
         Date: 08/02/2018         
         Local Time: 12:00          
         Read:
         Date: 12/02/2018         
         Local Time: 17:00                   
   
VII.2) Other additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
To access the SQ please use the linkhttps://neupc.delta-esourcing.com/tenders/UK-title/44J68G6PH4
To access the ITN documentation, please use the link https://neupc.delta-esourcing.com/respond/542YJZX5KB
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://neupc.delta-esourcing.com/tenders/UK-UK-Leeds:-Research%2C-testing-and-scientific-technical-simulator./542YJZX5KB

To respond to this opportunity, please click here:
https://neupc.delta-esourcing.com/respond/542YJZX5KB


View Award Notice