UK-Leeds: Machine tools.
Section I: Contracting Authority
I.1) Name and addresses
NEUPC Ltd
Phoenix House, 3 South Parade, 3 South Parade, Leeds, LS1 5QX, United Kingdom
Tel. +44 1134871759, Email: m.johnson@neupc.ac.uk
Contact: Matthew Johnson
Main Address: www.neupc.ac.uk
NUTS Code: UK
I.2) Joint procurement
The contract involves joint procurement: Yes.
In the case of joint procurement involving different countries, state applicable national procurement law: Not provided
The contract is awarded by a central purchasing body: Yes.
I.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at: https://neupc.delta-esourcing.com/commonNoticeSearch/noticeSearchResults.html
Additional information can be obtained from: the abovementioned address
Tenders or requests to participate must be sent to the abovementioned address
Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at: Not provided
I.4) Type of the contracting authority
Body governed by public law
I.5) Main activity
Education

Section II: Object
II.1) Scope of the procurement
II.1.1) Title: Engineering & Textiles Machines, Ancillary Products, Materials & Consumables
Reference Number: LAB2011 NE
II.1.2) Main CPV Code:
42600000 - Machine tools.

II.1.3) Type of contract: SUPPLIES
II.1.4) Short description: Engineering & Textiles Machines, Ancillary Products, Materials & Consumables (as listed in each Lot)
II.1.5) Estimated total value:
Value excluding VAT: 100,000,000
Currency: GBP
II.1.6) Information about lots:
This contract is divided into lots: Yes
Tenders may be submitted for: All lots
Maximum number of lots that may be awarded to one tenderer: 10
The contracting authority reserves the right to award contracts combining the following lots or groups of lots: Not provided

II.2) Description
II.2) Description Lot No. 1

II.2.1) Title: Drilling Machines
Lot No: 1
II.2.2) Additional CPV codes:
43132100 - Drilling machinery.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: Drilling Machines (including but not limited to)

Deep-Hole Drilling Machine
Gang Drilling Machine
Multi-Spindle Drilling Machine
Portable Drilling Machine
Radial Drilling Machine
Turret-Type Drilling Machine
Upright Drilling Machine
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Quality / Weighting: 60

Cost criterion - Name: Price / Weighting: 40

II.2.6) Estimated value:
Value excluding VAT: 25,000,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 36
This contract is subject to renewal: Yes
Description of renewals: Potential 12 month extension option

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: Yes
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: Yes
Identification of the project: Call offs may involve ERDF/ESIF Funding
II.2.14) Additional information: https://www.delta-esourcing.com/tenders/UK-UK-Leeds:-Machine-tools./7M6WZFP3BJ
II.2) Description Lot No. 2

II.2.1) Title: Finishing Machines
Lot No: 2
II.2.2) Additional CPV codes:
42631000 - Machine tools for finishing metals.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: Finishing Machines (including but not limited to)

Rotary Polishing Machine
Dual Action Polishing Machine
Orbital Polishing Machine
Buffing Machine
Lapidary Stone Cutting Machine
Lapidary Gem Cutting Machine
Belt Grinding Machine
Bench Grinding Machine
Gear Cutting Machine
Surface Grinding Machine
Belt Sander
Orbital Sander
Disc Sander
Finishing Sander
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Quality / Weighting: 60

Cost criterion - Name: Price / Weighting: 40

II.2.6) Estimated value:
Value excluding VAT: 25,000,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 36
This contract is subject to renewal: Yes
Description of renewals: Potential 12 month extension option

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: Yes
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: Yes
Identification of the project: Call offs may involve ERDF/ESIF Funding
II.2.14) Additional information: https://www.delta-esourcing.com/tenders/UK-UK-Leeds:-Machine-tools./7M6WZFP3BJ
II.2) Description Lot No. 3

II.2.1) Title: Shaping Machines
Lot No: 3
II.2.2) Additional CPV codes:
42620000 - Lathes, boring and milling machine tools.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: Shaping Machines (including but not limited to)

Speed Lathe
Engine Lathe
Turret Lathe
Tool Room Lathe
CNC Lathe
Punch Slotter
Production Slotter
Precision Slotter
Special Purpose Slotter
Manual Bending Machine
Hydraulic Bending Machine
CNC Bending Machine
Rolling Mill
Form Rolling Machine
Plate Rolling Machine
Double Housing Planer
Open Side Planer
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Quality / Weighting: 60

Cost criterion - Name: Price / Weighting: 40

II.2.6) Estimated value:
Value excluding VAT: 50,000,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 36
This contract is subject to renewal: Yes
Description of renewals: Potential 12 month extension option

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: Yes
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: Yes
Identification of the project: Call offs may involve ERDF/ESIF Funding
II.2.14) Additional information: https://www.delta-esourcing.com/tenders/UK-UK-Leeds:-Machine-tools./7M6WZFP3BJ
II.2) Description Lot No. 4

II.2.1) Title: Cutting Machines
Lot No: 4
II.2.2) Additional CPV codes:
43812000 - Sawing equipment.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: Cutting Machines (including but not limited to)

Die Cutting Machine
Band Knife Machine
Straight Knife Machine
Water Jet Cutting Machine
Plasma Cutting Machine
Laser Cutting Machine
EDM Cutting Machine
Band Saw Machine
Manual Guillotine
Hydraulic Guillotine
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Quality / Weighting: 60

Cost criterion - Name: Price / Weighting: 40

II.2.6) Estimated value:
Value excluding VAT: 25,000,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 36
This contract is subject to renewal: Yes
Description of renewals: Potential 12 month extension option

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: Yes
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: Yes
Identification of the project: Call offs may involve ERDF/ESIF Funding
II.2.14) Additional information: https://www.delta-esourcing.com/tenders/UK-UK-Leeds:-Machine-tools./7M6WZFP3BJ
II.2) Description Lot No. 5

II.2.1) Title: Pressing & Forging Machines
Lot No: 5
II.2.2) Additional CPV codes:
42636000 - Presses.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: Pressing & Forging Machines (including but not limited to)

Hydraulic Press
Stamping Press
Pneumatic Press
Mechanical Press
Manual Press
Press brake
Forging Press
Gap Press
Punch Press
Straightening Press
Assembly Press
Brake Press
C frame hydraulic Press
CNC Press brakes
H-frame Press
Laminating Press
Punching Press
Servo Press
Bench Press
Horning Press
Hydraulic Press Brake
Inclinable frame Press
Lid Press
Mechanical Forge
Hydraulic Forge
Screw Forge
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Quality / Weighting: 60

Cost criterion - Name: Price / Weighting: 40

II.2.6) Estimated value:
Value excluding VAT: 50,000,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 36
This contract is subject to renewal: Yes
Description of renewals: Potential 12 month extension option

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: Yes
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: Yes
Identification of the project: Call offs may involve ERDF/ESIF Funding
II.2.14) Additional information: https://www.delta-esourcing.com/tenders/UK-UK-Leeds:-Machine-tools./7M6WZFP3BJ
II.2) Description Lot No. 6

II.2.1) Title: Hot Work Machines
Lot No: 6
II.2.2) Additional CPV codes:
42660000 - Soldering, brazing and welding tools, surface tempering and hot-spraying machines and equipment.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: Hot Work Machines (including but not limited to)

Shielded Metal Arc Welding Machine
MIG Welding Machine
TIG Welding Machine
Flux-Cored Arc Welding Machine
Energy Beam Welding Machine
Plasma Arc Welding Machine
Brazing Machine
Soft Soldering Machine
Hard Soldering Machine
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Quality / Weighting: 60

Cost criterion - Name: Price / Weighting: 40

II.2.6) Estimated value:
Value excluding VAT: 25,000,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 36
This contract is subject to renewal: Yes
Description of renewals: Potential 12 month extension option

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: Yes
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: Yes
Identification of the project: Call offs may involve ERDF/ESIF Funding
II.2.14) Additional information: https://www.delta-esourcing.com/tenders/UK-UK-Leeds:-Machine-tools./7M6WZFP3BJ
II.2) Description Lot No. 7

II.2.1) Title: Textile Machines
Lot No: 7
II.2.2) Additional CPV codes:
42710000 - Machinery for textiles.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: Textile Machines (including but not limited to)

Water jet Loom
Floor Loom
Projectile Loom
Rigid Heddle Loom
Shuttle Loom
Inkle Looms
Rapier Loom
Table Loom
Backstrap Looms
Circular Loom
Frame Looms
Jacquard
Rapier
Tapestry Loom
Hand Loom
Power Loom
Ribbon Loom
Mechanical Sewing Machine
Electronic Sewing Machine
Computerized Sewing Machine
Embroidery Sewing Machine
Quilting Sewing Machine
Serger (Overlock) Sewing Machine
Heavy-Duty Sewing Machine
Industrial Sewing Machine
Manual Knitting Machine
Hand-Crank Knitting Machine
Punch Card Knitting Machine
Electronic Knitting Machine
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Quality / Weighting: 60

Cost criterion - Name: Price / Weighting: 40

II.2.6) Estimated value:
Value excluding VAT: 25,000,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 36
This contract is subject to renewal: Yes
Description of renewals: Potential 12 month extension option

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: Yes
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: Yes
Identification of the project: Call offs may involve ERDF/ESIF Funding
II.2.14) Additional information: https://www.delta-esourcing.com/tenders/UK-UK-Leeds:-Machine-tools./TX733G96ES
II.2) Description Lot No. 8

II.2.1) Title: Textile Materials
Lot No: 8
II.2.2) Additional CPV codes:
39560000 - Miscellaneous textile articles.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: Textile Materials (including but not limited to)

Cotton
Furs
Nylon fibers
Polyester fibers
Acrylic fibers
Viscose fibers
Rayon fibers
Cotton fibers
Wool fibers
Silk fibers
Vegetable fibers
Polypropylene fibers
Glass fibers
Ceramic fibers
Polymer aramid fibers
Asbestos fibers
Polyurethane fiber or spandex
Polyvinyl alcohol fiber
Polyethylene fiber
Rock wool or mineral wool
Cotton thread
Silk thread
Polyester thread
Polyamide thread
Bismalemide thread
Fiberglass thread
Graphite thread
Nylon thread
Resin impregnated thread
Rubber or latex thread
Spandex thread
Asbestos thread
Metal thread
Wool yarn
Cotton yarn
Polyester yarn
Acrylic yarn
Silk yarn
Ramie yarn
Animal hair yarn
Synthetic yarn
Jute yarn
Coir yarn
Paper yarn
Hemp yarn
Glass yarn
Flax yarn
Blended yarn
Gimped yarn
Metalicized yarn
Plain weave silk fabrics
Jacquard weave silk fabrics
Knit silk fabrics
Silk velvets fabrics
Plain weave wool fabrics
Jacquard weave wool fabrics
Knit wool fabrics
Twill weave wool fabrics
Carded wool
Noil of wool
Wool degreased or carbonized and not carded or combed
Cotton terry towelling
Plain weave cotton fabrics
Twill weave cotton fabrics
Cotton oxford cloths
Knit cotton fabrics
Cotton velvet fabrics
Cotton chenille
Cotton carded or combed
Hessian or hemp or jute cloth
Cheese cloth or fabric
Bismalemide fabric or cloth
Graphite fabric or cloth
Glass fabric or cloth
Resin impregnated fabric or cloth
Wire mesh fabric or cloth
Lace
Netting
Mesh
Coated fabrics
Upholstery fabrics
Hook and loop fabrics or tapes
Elastic braid
Burlap cloth
Rubber fabrics
Paper yarn fabric
Tracing cloth
Bolting cloth
Ornamental trimmings
Binding fabrics
Tape fabrics
Felt fabrics
Webbing fabrics
Quilted cloth
Camouflage cloth
Parachute cloth
Marquisette cloth
Dossal
Welting fabrics
Damask fabric
Satin fabric
Waterproof fabric
Embroidered fabric
Narrow weave fabric
Gauze fabric
Animal hair or horsehair fabric
Cotton batting
Synthetic batting
Straight pins
Safety pins
Zippers
Buckles
Buttons
Snaps
Clasps
Garment rivet
Pin cushions
Sewing kits
Thimbles
Sewing needles
Bobbins or bobbin holders
Seam gauge
Bodkin
Loop turner
Fabric or tailors chalk holders
Fabric markers or fabric pencils or fabric chalk
Serrated pattern tracing wheel
Tapestry needles
Weaving needles
Looper looms
Cotton jersey loops
Needlepoint canvas
Magnet wands
Seam ripper
Needle threader
Dressmakers ruler
Liquid thread lock or reinforcer
Cross stitch fabric or needles
Cross stitch designs
Embroidery hoops
Crochet hooks
Quilters basting tools
Quilters pins
Pattern cutting mats or boards
Pattern notcher
Weaving accessories
Hand sewing needles
String art kits
Rexlace
Lacing or stringing accessories
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Quality / Weighting: 50

Cost criterion - Name: Price / Weighting: 50

II.2.6) Estimated value:
Value excluding VAT: 10,000,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 36
This contract is subject to renewal: Yes
Description of renewals: Potential 12 month extension option

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: Yes
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: Yes
Identification of the project: Potential call offs may involve ERDF/ESIF Funding
II.2.14) Additional information: https://www.delta-esourcing.com/tenders/UK-UK-Leeds:-Machine-tools./3C5ES97R45
II.2) Description Lot No. 9

II.2.1) Title: Engineering Raw Materials
Lot No: 9
II.2.2) Additional CPV codes:
14700000 - Basic metals.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: Engineering Raw Materials (including but not limited to)

Teak wood
Poplar wood
Pine wood
Oak wood
Maple wood
Cherry wood
Plywood
Particleboard
Medium density fiberboard
Cedar wood
Spruce wood
Fir wood
Pressure treated wood
Oriented Strand Board (OSB)
Mahogany wood
Natural graphite
Steel
Aluminum
Nickel
Iron
Lead
Tin
Zinc
E24-2 or A37-2 steel
Stainless steel alloy 304
Stainless steel alloy 304l
Stainless steel alloy 316
Ferro nickel alloy
Z90WDCV6542 or M2 high speed steel
Z90WDKCV65542 or M35 high speed steel
Rubber or latex thread
Rubber fabrics
Liquid silicone rubber LSR
Latex rubber
Crepe rubber
Smoked sheet rubber
Natural foam rubber
Block or crumb rubber
Vulcanized rubber
Chlorinated rubber
Hydrochloride rubber
Cyclized rubber
Isomerized rubber
Thermplastic rubber
Reclaimed rubber
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Quality / Weighting: 50

Cost criterion - Name: Price / Weighting: 50

II.2.6) Estimated value:
Value excluding VAT: 10,000,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 36
This contract is subject to renewal: Yes
Description of renewals: Potential 12 month extension option

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: Yes
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: Yes
Identification of the project: Potential call offs may involve ERDF/ESIF Funding
II.2.14) Additional information: https://www.delta-esourcing.com/tenders/UK-UK-Leeds:-Machine-tools./AM2FZ7X994
II.2) Description Lot No. 10

II.2.1) Title: Machine Workshop Consumables
Lot No: 10
II.2.2) Additional CPV codes:
24951000 - Greases and lubricants.

II.2.3) Place of performance:
UK UNITED KINGDOM

II.2.4) Description of procurement: General Workshop Consumables (including but not limited to)

Engine oil
Cutting oil
Gear oil
Hydraulic oil
Transformer oil or insulating oil
Transmission oil
Brake oil
Antigalling
Assembly pastes
Anti adhesives
Graphite lubricants
Spray lubricants
Anti seize or anti stain compounds
Leak stop
Lubricating soaps
Damping fluids
Watch lubricating oils
General purpose lubricants
Pump lubricating oils
Weapon lubricating oils
Lens preparation fluids
Tempering oils
Quenching oils
Lubricants for food processing equipment
Turbine oil
Fire resistant hydraulic fluid
Refrigerating machine oil
Heat transfer oil or fluid
Moisture repellent
Anti corrosion lubricant
Rust remover
Rust proofing preparation
Anti weld pastes
Penetrating oils
Antifreeze
Silicone grease
Grease
Fluoropolymer grease
Wool grease
Thermal grease
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Quality / Weighting: 50

Cost criterion - Name: Price / Weighting: 50

II.2.6) Estimated value:
Value excluding VAT: 10,000,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Duration in months: 36
This contract is subject to renewal: Yes
Description of renewals: Potential 12 month extension option

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: Yes
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: Yes
Identification of the project: Potential call offs may involve ERDF/ESIF Funding
II.2.14) Additional information: https://www.delta-esourcing.com/tenders/UK-UK-Leeds:-Machine-tools./UZB4686R28


Section III: Legal, Economic, Financial And Technical Information
III.1) Conditions for participation
III.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
List and brief description of conditions:
Not Provided
III.1.2) Economic and financial standing
Selection criteria as stated in the procurement documents
List and brief description of selection criteria:
Not Provided
Minimum level(s) of standards possibly required (if applicable) :
Not Provided
III.1.3) Technical and professional ability
Selection criteria as stated in the procurement documents
List and brief description of selection criteria:
Not Provided
Minimum level(s) of standards possibly required (if applicable) :
Not Provided
III.1.5) Information about reserved contracts (if applicable)
The contract is reserved to sheltered workshops and economic operators aiming at the social and professional integration of disabled or disadvantaged persons: No
The execution of the contract is restricted to the framework of sheltered employment programmes: No

III.2) Conditions related to the contract

III.2.2) Contract performance conditions
Not Provided
III.2.3) Information about staff responsible for the performance of the contract
Obligation to indicate the names and professional qualifications of the staff assigned to performing the contract: No

Section IV: Procedure
IV.1) Description OPEN
IV.1.1) Type of procedure: Open

IV.1.3) Information about a framework agreement or a dynamic purchasing system
The procurement involves the establishment of a framework agreement
Framework agreement with several operators
Envisaged maximum number of participants to the framework agreement:
Not Provided
In the case of framework agreements justification for any duration exceeding 4 years: Not Provided


IV.1.6) Information about electronic auction:
An electronic auction will be used: No
Additional information about electronic auction: Not provided
IV.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
IV.2) Administrative information
IV.2.1) Previous publication concerning this procedure:
Notice number in the OJ S: 2024/S 000 - 023885
IV.2.2) Time limit for receipt of tenders or requests to participate
Date: 25/04/2025 Time: 12:00

IV.2.4) Languages in which tenders or requests to participate may be submitted: English,
IV.2.6) Minimum time frame during which the tenderer must maintain the tender:
Until: 30/06/2025

IV.2.7) Conditions for opening of tenders:
Date: 25/04/2025
Time: 12:00
Place:
Leeds


Section VI: Complementary Information
VI.1) Information about recurrence
This is a recurrent procurement: No
Estimated timing for further notices to be published: Not provided
VI.2) Information about electronic workflows
Electronic ordering will be used Yes
Electronic invoicing will be accepted Yes
Electronic payment will be used Yes
VI.3) Additional Information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.One consolidated bid may be submitted for Lots 1-6. Individual bids must be submitted separately for lots 7, 8, 9 and 10. Links to express an interest in these are included in Lot descriptions.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://neupc.delta-esourcing.com/tenders/UK-UK-Leeds:-Machine-tools./7M6WZFP3BJ

To respond to this opportunity, please click here:
https://neupc.delta-esourcing.com/respond/7M6WZFP3BJ
VI.4) Procedures for review
VI.4.1) Review body:
NEUPC Ltd
NEUPC Ltd, Phoenix House, 3 South Parade, Leeds, LS1 5QX, United Kingdom
Tel. +44 1133443958
VI.4.2) Body responsible for mediation procedures:
NEUPC Ltd
NEUPC Ltd, Phoenix House, 3 South Parade, Leeds, LS1 5QX, United Kingdom
Tel. +44 1133443958
VI.4.3) Review procedure
Precise information on deadline(s) for review procedures:
Not Provided
VI.4.4) Service from which information about the lodging of appeals may be obtained:
NEUPC Ltd
NEUPC Ltd, Phoenix House, 3 South Parade, Leeds, LS1 5QX, United Kingdom
Tel. +44 1133443958
VI.5) Date Of Dispatch Of This Notice: 19/02/2025

Annex A



IV) Address of the other contracting authority on behalf of which the contracting authority is purchasing
Purchased on behalf of other contracting authority details:
1: Contracting Authority
APUC
Unit 27, Stirling Business Centre, 73 Wellgreen Pl, Stirling, FK8 2DZ, United Kingdom
Email: annemartin@apuc-scot.ac.uk
Contact: Anne Martin
Main Address: https://www.apuc-scot.ac.uk/
NUTS Code: UK

IV) Address of the other contracting authority on behalf of which the contracting authority is purchasing
Purchased on behalf of other contracting authority details:
2: Contracting Authority
LUPC
23-26 St Dunstan's Hill, City of London, London, EC3R 8HN, United Kingdom
Email: a.ramirez@lupc.ac.uk
Contact: Antonio Ramirez
Main Address: https://www.lupc.ac.uk
NUTS Code: UK

IV) Address of the other contracting authority on behalf of which the contracting authority is purchasing
Purchased on behalf of other contracting authority details:
3: Contracting Authority
NWUPC
Room 210, Salford Innovation Forum, 51 Frederick Rd, Salford, M6 6FP, United Kingdom
Email: lisa.blackburn@nwupc.ac.uk
Contact: Lisa Blackburn
Main Address: https://www.nwupc.ac.uk
NUTS Code: UK

IV) Address of the other contracting authority on behalf of which the contracting authority is purchasing
Purchased on behalf of other contracting authority details:
4: Contracting Authority
SUPC
Reading Enterprise Centre, Whiteknights Rd, Reading, RG6 6BU, United Kingdom
Email: t.a.smith@reading.ac.uk
Contact: Taron Smith
Main Address: https://www.supc.ac.uk/
NUTS Code: UK

IV) Address of the other contracting authority on behalf of which the contracting authority is purchasing
Purchased on behalf of other contracting authority details:
5: Contracting Authority
Crescent Purchasing Consortium
Crescent Purchasing Ltd (CP Ltd), Procurement House, Unit 23, Leslie Hough Way, Salford, M6 6AJ, United Kingdom
Email: P.McMullan@thecpc.ac.uk
Contact: Peter McMullan
Main Address: https://www.thecpc.ac.uk/
NUTS Code: UK